

                         HARVARD GRAPHICS VERSION 3.0
                            HP LASERJET 4L PRINTER
                          PRINTER DRIVER INSTALLATION


     ABOUT THIS DOCUMENT

     This document will help you install and select an HP LaserJet 4L
     printer driver for Harvard Graphics version 3.0.

     INSTALLING A PRINTER DRIVER

     Setting up your HP LaserJet 4L printer with Harvard Graphics 3.0 is a
     two-step process:

     1.   Installing the printer driver.

     2.   Selecting the printer driver in Harvard Graphics.

          To install a printer driver for Harvard Graphics 3.0 from the
          Printer Driver disk that came with your HP LaserJet 4L printer,
          follow these steps:
     ___________

     Note   If you are currently viewing this application note, you may
            have completed some of the steps listed below.
     ___________

     1.   Insert the disk in drive A: (or B:).

     2.   At the operating system prompt, type A: (or B:), then press
          [Enter] to make A: (or B:) the current drive.
     3.   At the prompt, type DRIVER4L, then press [Enter].

          a.   At the PROGRAM INFORMATION menu, press any key to continue.

          b.   At the main menu, select Harvard Graphics version 3.0, then
               press [Enter].
      ___________

     Note   One of the options offered is "View Application Note."  If
            you are now viewing the Harvard Graphics 3.0 Application
            Note, read this section and the next section entitled
            "Selecting a Printer Driver".  When you have finished reading
            both sections, press the [Escape] key to exit the Application
            Note and proceed to step "c," below.
     ___________

          c.   Select "Copy Driver File(s)," then press [Enter].

          d.   If the path shown for Harvard Graphics 3.0 is correct,
               press [Enter].  However, if the default path that is shown
               is not correct, use the "Backspace" key to erase it; type
               the correct path; then press [Enter].

     When the update is complete, the following message is displayed:

     "The driver file has been copied to your hard disk."


     SELECTING AND CONFIGURING A PRINTER DRIVER

     To select the HP LaserJet 4L printer driver you installed, start
          Harvard Graphics 3.0 and follow these steps:

     1.   At the [F6]- Main Menu, select [8]-Setup menu.

     2.   Select [5]-Printer 1 Setup Menu.

     3.   With the cursor highlighting the "Printer type" selection, press
          [F3]-Choices to see a list of printers.

     4.   Use the "arrow" keys to scroll through the list of printer
          drivers, highlight the "LaserJet 4L (HPGL/2)" printer driver,
          then press [Enter].

     5.   Press [Tab] to highlight "Output port," then press[F3]-Choices
          to list available ports.  Select the parallel port your printer
          is using, then press [Enter].

     6.   Press [Tab] to highlight "Default paper size."  Press [F3]-
          Choices, select the appropriate paper size, then press [Enter].

     7.   Press [Tab] to highlight "Use Spooler."  Press [F3]-Choices,
          select "Yes" or "No," then press [Enter].
     __________

     Note   Setting "Use spooler" to "Yes" initiates the Harvard Graphics
            internal printer spooler which will allow you to return to
            work within Harvard Graphics sooner after printing.  If you
            select "No" for this option, you will have to wait until the
            entire print job has completed to continue working.

            If you are using another print spooler,(a hardware spooler or
            a software spooling utility, for example), you should select
            "No" for the "Use spooler" option.  Do not use the Harvard
            Graphics spooler while any other spooler is active.
     __________

     8.   Press [Tab] to highlight "Quality", press [F3]-(Choices),
          highlight High, Medium or Low print quality, then press [Enter].

     9.   After making all selections, select [F10]-Continue, then press
          the "Esc" key to return to the F6-Main Menu.
     __________

     Note   The resolution for the HP LaserJet 4L printer is 300 DPI for
            all three selections.
     __________








     NOTICE

     The information in this document is subject to change without notice.

     HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
     MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  Hewlett-
     Packard shall not be liable for errors contained herein or for
     incidental consequential damages in connection with the furnishing,
     performance, or use of this material.

     Copyright (c) 1992 by HEWLETT-PACKARD COMPANY.
